Heating | Cooling | Solutions | Valve
Liquid Seperator ApplicationThe automatic liquid separator is used to condensate (liquid) to separate saturated gas sampling. The automatic float occurs at atmospheric pressure or higher that gas flows back into the process. The float separator also prevents the gas that is secreted. It just flows so fluid. Description The ALD 010 separates off based on gravity. …
Condens seperator Tách Nước ACS Condens seperator Application The Ankersmid universal separator is used to condensate (liquid) to separate saturated gas sampling Description This Moisture separators made from the same basic components as our modular filter series ACS. The separator is equipped with the 2nd gasinlet which is closed with a blind plug. The gas is fed through a vertical pipe …
Liquid alarm ApplicationThis liquid sensors are used in gas conditioning systems based safety critical condensate. Coolers, water stop and automatic condensate drains are to separate. When failure of one of these components can have a profound effect. Our fluid monitoring in emergency alarms can save your analyzer. When the alarm is off a pump, a solenoid valve …
Condensate removal, Filters The categories are listed below and links to our standard designs. Often your individual needs easily achievable. Hose pump or automatic condensate drain At a pressure of a gas cooler is usually a hose used to pump the condensate disposal. In an automatic fluid pressure separator can be used. Liquid collecting container. If there is …
Gas Compressor cooler 85x/86x Ex Series ApplicationAnkersmid Compressor Coolers are used to lower the dew point ofhumid gas to avoid condensate entering into the gas analyser.This unique micro-processor controlled compressor cooler has been designed with a powerful dew point stabiliser. The dew pointis set at 3°C. A good and stable gas dew point avoids cross …
Gas Compressor Cooler 80x/81x ex series ApplicationAnkersmid Compressor Coolers are used to lower the dew point ofhumid gas to avoid condensate entering into the gas analyser.This unique micro-processor controlled compressor cooler hasbeen designed with a powerful dew point stabiliser. The dew pointis set at 5°C. A good and stable gas dew point avoids crossinterferenceif the …
Gas cooler 400-500-600 Application Ankersmid Peltier coolers are used to lower the dew point of humid gas to prevent condensate from entering the gas analyzer. A good and stable gas dew point avoids cross interference if the analyzer is sensitive to H2O. Description This unique microprocessor controlled Peltier cooler is designed with a powerful dew point stabilizer. The …
Gas pre coolers ApplicationAmbient coolers are designed to be used e.g. pre-cooler or for use in applications where the sample outlet dew point is not necessary to stable at a specific temperature (e.g. all electrical Ankersmid coolers are set to +4°C). DescriptionBy lowering the temperature of the sample gasses, condensate liquid will be formed on …
Gas compressor cooler Application Ankersmid Compressor Coolers are used to lower the dew point of humid gas to avoid condensate entering into the gas analyser. This unique micro-processor controlled compressor cooler has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between …
Coolers All our electronic gas cooler are made with our own patented heat exchangers. The extremely low resolution is obtained by the new cooler and heat exchanger technology which are patented. The design of the heat exchanger for a so-called shock effect of the cooling gas to which the contact time with the condensate such …